Cleaning and carede
function, follow the instructions for
use on the machine care products.
17.6 Sieve system
The sieve system filters coarse
impurities from the flushing circuit.
Carry out machine maintenance
If the Machine Care indicator on the
control panel lights up or the display
advises you to do so, run the Machine
Care program.
3
2
Hints
¡Run the machine program
Carry out cleaning without the dishes
being put away.
¡Use only specifically for
Machine care products suitable for
dishwashers and not dishwasher
detergent. Pay attention to the
manufacturer's instructions.
¡Make sure that there are no
There are aluminum parts in the washing
compartment of the device.
¡If you want machine care after 3
If you have not carried out any
washing cycles, the machine care
display will automatically go out.
¡Observe the safety instructions
wise and the instructions for use
on the packaging of machine care
products.
1
1
Micro sieve
fine sieve
coarse sieve
2
3
Clean sieves
Impurities from the rinse water can
clog the sieves.
1.After each rinse, check the sieves
for residue.
2.Turn the coarse sieve
counterclockwise and remove the
sieve system.
1.Remove any coarse dirt in the
interior with a damp cloth.
‒ Make sure that no foreign objects
fall into the pump pot.
2.Clean sieves.
3.Fill the machine care product into
the device.
2
4. press.
press.5.
aMachine care is carried out
guided.
aAs soon as machine maintenance is finished
det, the machine care display goes
out.
1
47
To Next Page
Loading...
