Bosch SM SERIES - Making the Device Frost-Proof; Transporting the Device; Dispose of Old Device

deTransport, storage and disposal
19.2 Make the device frost-
proof
19.4 Dispose of old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
If the device is in a room at risk of
frost, e.g. B. in a holiday home, empty
the device completely.
WARNING
Risk of damage to health! Children can
become trapped in the device and
endanger their lives.
▶ For old devices, pull the power plug
of the power connection cable, then
cut the power connection cable and
destroy the lock on the device door
to such an extent that the device
door no longer closes.
▶
Empty the device. → Page 62
19.3 Transporting the device
To avoid damage to the device,
empty the device before transport.
A notice:To ensure that no residual
water gets into the machine control and
causes damage to the device, only
transport the device upright.
1.Pull out the mains plug of the
mains connection cable.
1.Remove dishes from the
appliance.
2.Cut the mains connection cable.
2.Secure loose parts.
3.Open the tap.
4.Switch on the device. → Page 41
3.Dispose of the device in an environmentally friendly
manner.
5.Select the program with the
highest temperature.
→ "Programs", page 20
This device complies with
European standards
Directive 2012/19/EU
about old electrical and
electronic devices (waste
electrical and electronic
equipment – WEEE).
The directive provides the
framework for an EU-
wide take-back and
Recycling of old devices.
6.Start the program. → Page 42
7.To empty the device, cancel the
program after approx. 4 minutes.
→ "Cancel program", page
42
8th.Switch off the device. → Page 42
9.Close the tap.
10.To empty the remaining water from
the device, turn off the inlet
Loosen the hose and let it drain
out.
62