Bosch Solution 16plus - System Testing Procedures; Walk, Audible, and Strobe Tests

Solution16
Plus
26
Bosch Security Systems 03/10 BLCC100U
User Guide
System > Clock >
Set Date & Time
MENU 7-1-0
This menu allows you to program and or adjust the date and time
stored in the Solution 16
Plus
control panel.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [1] + [0].
The keypad will display the current date and time.
Set Date And Time
01-Jan-2004 04:37am
Press
 OK to SAVE
2. Use the [] and [] keys to program the month, day, year,
hour and minute. Use [] and [] keys to scroll cursor
left and right to between the month, day, year, hour and
minute.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Schedules
Schedules may have been congured by your installer during the
installation of your system. These may be used to automatically
operate outputs or other system functions at particular times of
the day or days of the week etc. The following options allow you
to vary or change the time at which the schedules operate. Your
installer will advise you on the exact conguration and function
of the schedules in your system.
System > Schedules >
Name
MENU 7-5-0
This menu allows you to program 16 characters of text for each
schedule name.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [5] + [0].
A list of schedules will display on the keypad.
Sk001 Schedule 1 Name
Sk002 Schedule 2 Name
Sk003 Schedule 3 Name
Press
 OK or MENU
2. Use the [] and [] keys to select the schedule name
that you want to change, then press [OK] to select.
Alternatively, you can enter the schedule number, then
press [OK].
The keypad will display the following:
Name S001
Schedule 1 Name
PRESS
 OK to SAVE
3. To program the schedule name, use the [] and []
keys to scroll the cursor left and right across the user
name text. Use the [] and [] keys to scroll through the
dierent characters available. To clear all text from the
cursor position to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Schedules >
Time
MENU 7-5-1
This menu allows you to program both the start time and stop
time of each schedule.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [6] + [2].
A list of schedules will display on the keypad.
Sk001 Schedule 1 Name
Sk002 Schedule 2 Name
Sk003 Schedule 3 Name
Press
 OK or MENU
2. Use the [] and [] keys to select the schedule that you
want to change, then press [OK] to select. Alternatively,
you can enter the schedule number, then press [OK].
The keypad will display the following:
Sk001 Schedule 1 Name
Start Time: 00:00
Stop Time: 00:00
Press 0-9 OK to SAVE
3. Enter the new start and stop times in 24-hour format
(00:00 to 23:59 hours).
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Schedules >
Day
MENU 7-5-2
This menu programs which days of the week the timer execute
function will operate. To toggle the day of the week on/o, press
the corresponding number on the keypad (e.g. to turn Monday
on, press [2] + [OK], to toggle Monday o, press [2] + [OK] ).
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [5] + [2].
A list of schedules will display on the keypad.
Sk001 Schedule 1 Name
Sk002 Schedule 2 Name
Sk003 Schedule 3 Name
Press
 OK or MENU
2. Use the [] and [] keys to select the schedule that you
want to change, then press [OK] to select. Alternatively,
you can enter the schedule number, then press [OK].
The keypad will display the following: