27
Bosch Security Systems 03/10 BLCC100U
Solution16
Plus
User Guide
Day Sk001
S M T W T F S Hol
Y Y Y Y Y Y Y N
Press 1-8 OK to SAVE
3. Press [1] to [8] to enable/disable the days of the week that
the schedule will operate.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >
Name
MENU 7-6-0
This menu allows you to program 16 characters for the holiday
name.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [0] + [6].
A list of holiday names will display on the keypad.
2. Use the [] and [] keys to select the timer name that you
want to change, then press [OK] to select. Alternatively,
you can enter the timer number, then press [OK].
The keypad will display the following:
Name H001
Holiday 1 Name
PRESS
OK to SAVE
3. To program the holiday name, use the [] and [] keys to
scroll the cursor left and right across the user name text.
Use the [] and [] keys to scroll through the dierent
characters available. To clear all text from the cursor
position to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >
Start / Stop Day
MENU 7-6-1
This menu allows you to program the start date and the stop
date of each holiday period.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [6] + [1].
A list of holiday names will display on the keypad.
2. Use the [] and [] keys to select the holiday that you
want to change, then press [OK] to select. Alternatively,
you can enter the holiday number, then press [OK].
The keypad will display the holiday start date:
Holiday Dates H001
Start Date Stop Date
01 Jan 01 Jan
Press
OK to SAVE
3. To program the holiday start date and stop date, use
the [] and [] keys to scroll the cursor left and right
between the holiday day and month. Use the [] and []
keys to scroll the day and month.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Options >
Keypad Hi/Lo Temp
MENU 7-7-3
The keypad Hi/Lo temperature allows you to program the
minimum (0 °C) and maximum (50 °C) temperatures the keypad
will monitor (tolerance = +/- 2 °C).
If the temperature falls below the minimum temperature, the
keypad will display ‘Low Temp ˚xx’. If the temperature increases
above the maximum temperature, the keypad will display ‘High
temp ˚xx’.
(xx = programmed temperature to be monitored).
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [7] + [3].
The keypad will display the current temperature settings.
Keypad Hi/Lo Temp
High Temp Low Temp
00 00
Press
OK to SAVE
2. Use the [] and [] keys to program the ‘High’ and ‘Low’
temperatures. To toggle between the ‘High’ and ‘Low’
temperature, use the [] and [] keys (Range = 0°C to
50°C).
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Testing >
Site Name
MENU 7-7-7
This menu allows the master user to program the emails subject
line to identify the alarm system (eg. site name) to the receiving
party. A maximum of 32 characters of text can be entered in this
eld. Use the [] and [] keys to scroll the cursor left and right
to view the entire name.
1. Enter your Master PIN + [MENU].
2. Enter [7] + [7] + [7] + [OK].
The keypad will display the current Site Name.
Site Name P001
MyAlarm
Press
OK to SAVE
3. Using the numeric keys, enter the description of the control
panels site name. You can change a single chanracter by
scrolling the cursor left [] and right [].
At any time you can use the [] and [] keys to scroll through
the complete list of available characters.
To clear all text from the cursor position to the right, press
the [OFF] key.
To Next Page
Loading...
