7
Bosch Security Systems 03/10 BLCC100U
Solution16
Plus
User Guide
Icon Status Meaning
On
The existing service or trouble condi-
tion has been acknowledged.
O
No service or trouble conditions exist
Flashing
A service or trouble condition is present
that has not been acknowledged.
On
The area is turned Part On.
O
The area is not turned Part On.
On
The area is turned o.
O
The area is turned All On or Part On
On
The area is turned All On
O
The area is turned O
On
You have mail waiting to be read
O
No Mail
On
Area is ready to turn on (All On / Part
On)
O
Not ready, Zone Open
Red
LED
On
All On
Flashing
Alarm
Green
LED
On
Area is o.
Flashing
Area not ready to turn on
Red &
Green
LED
Flashing
Installer programming mode is active.
Table 3: Status ICONs, LED Indicator’s and Their Meanings
Keypad Tones
Your keypad emits several distinct tones and displays text to
alert you to system events. Additional bells or sirens may also
be connected to your system. Bells or sirens mounted on the
exterior of your premises alert neighbours to emergencies and
provide an audible guide for police and re ghters.
Type Meaning
Fire
Alarm
Tone
When a re zone sounds an alarm, the keypad
will sound 3 seconds on and 2 seconds o
(repeat).
Burglary
Alarm
Tone
When a burglary zone activates while your
system is turned on, your keypad emits a
continuous siren tone. It sounds for the time
set by your security company.
Trouble
Tone
When a system component is not functioning
properly, your keypad sounds 4 fast short beeps
followed by a 5 second pause (repeat).
Key
Press
Tone
Pressing any key on the keypad sounds one
short beep, indicating that the key press is
accepted.
Entry
Delay
Tone
When you enter the premises through a zone
programmed for entry delay, the keypad sound
a Hi/Low tone to remind you to turn o the area.
If the area is not turned o before the entry
delay expires, an alarm condition will sound and
a report may be sent to your alarm company.
Exit
Delay
Tone
After you turn an area All On, the keypad will
sound 1 short beep every second. During the
last 10 seconds fast short beeps will be heard. If
you don’t exit before the delay time expires and
an exit delay door is faulted, an alarm occurs.
Error
Tone
If you press an incorrect key, your keypad will
sound a 2 second tone.
Menu
Mode
The keypad will sound a Hi / Lo tone to indicate
you have entered MENU Mode and a Lo/Hi tone
to indicate you have exited MENU mode.
Chime
Tone
The keypad sounds fast short beeps to alert you
when a zone programmed for chime is faulted
or unsealled.
Table 4: Keypad Tones and Their Meanings
Figure 2: CM100 Graphic Keypad
To Next Page
Loading...
