Bosch VG5-7230-CPT5 - Operation Via the Browser

AUTODOME IP starlight 7000 HD Operation via the browser | en 135
Bosch Security Systems Operation Manual 2016-07 | 1.0 | F.01U.283.679
25 Operation via the browser
25.1 Live page
After the connection is established, the Live page is initially displayed. It shows the live video
image on the right of the browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video image. The items shown depend
on the settings on the 'Live' functions page.
25.1.1 Connection
Stream 1
Select this option to display stream 1 of the camera.
Stream 2
Select this option to display stream 2 of the camera.
M-JPEG
Select this option to display the M-JPEG stream of the camera.
25.1.2 PTZ
Pan and tilt
To control the pan and tilt of PTZ cameras:
1. Click and hold the up or down arrows to tilt.
2. Click and hold the left or right arrows to pan.
3. Click and hold the center area to control both.
Move the mouse cursor over the video image; additional options for controlling peripherals are
displayed with the mouse cursor.
Click to focus near.
Click to focus far.
25.1.3 Prepositions
The camera displays Preposition 1 through Preposition 6. Select the appropriate preposition
to view the video image for that preposition/scene. In the lower left of the video image, the
OSD displays the Camera number (title), the Preposition/Scene number, and the Preposition/
Scene number stored.
Below the list of prepositions/scenes is a drop-down list showing the stored prepositions/
scenes.
Select the appropriate preposition (1 through 6). Click to store the preposition.
Note: If the preposition is already stored, a dialog box displays the message, “Overwrite
current preposition?” Click OK to overwrite, or click Cancel to cancel the operation.
Click to display the selected preposition in the video image.