AUTODOME IP starlight 7000 HD Installing the In-Ceiling Mount | en 63
Bosch Security Systems Operation Manual 2016-07 | 1.0 | F.01U.283.679
9.9 Secure Housing to Ceiling
The In-ceiling Housing is secured to the ceiling by two (2) screw clamps.
1. Insert the In-ceiling Mount Assembly through the hole in the ceiling.
2. Tighten both clamps using a #2 Phillips screwdriver, to secure the housing to the ceiling.
Figure9.40: Secure camera to ceiling
1 Tether Point 4 Ceiling Clamp
2 Ceiling Clamp 5 Rotate Clockwise to Engage Clamp
3 Tether Point