EasyManua.ls Logo

Bosch VG5-7230-CPT5 - Special Functions

Bosch VG5-7230-CPT5
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AUTODOME IP starlight 7000 HD Operation via the browser | en 137
Bosch Security Systems Operation Manual 2016-07 | 1.0 | F.01U.283.679
25.1.8 Special Functions
Scan 360°
Click this button to start a continuous 360° pan. To stop the continuous pan, click a
directional control in the View Control tab.
Autopan
Click this button to pan the camera between user-defined limits.
Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Find home
Click this button to trigger the camera to seek its home position. The OSD displays the
message, “OSD: Finding Home Position.”
Show home
Click this button to display the home position of the camera.
Focus
Click this button to activate the Auto Focus mode on the camera.
The OSD displays the message, “OSD: Camera [number] / Auto Focus: ONE PUSH.”
Custom tour
Click this button to view a custom tour that was previously configured.
25.1.9 Special Functions
Scan 360°
Click this button to start a continuous 360° pan. To stop the continuous pan, click a
directional control in the View Control tab.
Autopan
Click this button to pan the camera between user-defined limits.
Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Find home
Click this button to trigger the camera to seek its home position. The OSD displays the
message, “OSD: Finding Home Position.”
Show home
Click this button to display the home position of the camera.
Focus
Click this button to activate the Auto Focus mode on the camera.
The OSD displays the message, “OSD: Camera [number] / Auto Focus: ONE PUSH.”
Custom tour
Click this button to view a custom tour that was previously configured.

Table of Contents

Related product manuals