Bosch VG5-7230-CPT5 - Attach Housing to the Interface Box

AUTODOME IP starlight 7000 HD Installing the In-Ceiling Mount | en 61
Bosch Security Systems Operation Manual 2016-07 | 1.0 | F.01U.283.679
1 2
3
4
5
Figure9.37: In-ceiling (IP54 Rating) Installation Diagram
1 White Trim Ring (factory-installed on
dome bubble)
5 Inner Ring
2 Black Trim Ring (supplied in the
shipping box of the camera)
6 Ceiling (IP54 housing) Gasket
3 Bubble 7 In-ceiling housing
4 Trim Ring Gasket
1. Place the gasket (provided in the shipping box of the camera) over the top of the in-
ceiling housing.
2. Carefully slide the gasket down over the housing, until it rests on the flange of the
housing.
9.8 Attach Housing to the Interface Box
The In-Ceiling Housing is attached to the Interface Box and secured by two (2) thumbscrews.