EasyManua.ls Logo

Bosch VG5-7230-CPT5 - AUX Control

Bosch VG5-7230-CPT5
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
136 en | Operation via the browser AUTODOME IP starlight 7000 HD
2016-07 | 1.0 | F.01U.283.679 Operation Manual Bosch Security Systems
25.1.4 AUX Control
Show preposition
Click this button to display a preposition.
Set preposition
Click this button to set a preposition.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
25.1.5 Intelligent Tracking
For cameras with the ability to track movement, options for tracking objects within the region
of interest are displayed in the Intelligent tracking panel.
When on, the tracking icon is displayed on the image together with the lines that track
moving objects.
Select Off, Auto or Click. If Click is selected, use the mouse to click on an object to track it.
25.1.6 Digital I/O
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image.
The alarm symbol is for information and indicates the status of an alarm input:
Active 1 = Symbol lights
Active 0 = Symbol not lit.
The camera alarm output allows the operation of an external device (for example, a light or a
door opener).
4 To operate, click the relay symbol.
The symbol is red when the output is activated.
25.1.7 Special Functions
Scan 360°
Click this button to start a continuous 360° pan. To stop the continuous pan, click a
directional control in the View Control tab.
Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Find home
Click this button to trigger the camera to seek its home position. The OSD displays the
message, “OSD: Finding Home Position.”
Show home
Click this button to display the home position of the camera.
Focus
Click this button to activate the Auto Focus mode on the camera.
The OSD displays the message, “OSD: Camera [number] / Auto Focus: ONE PUSH.”

Table of Contents

Related product manuals