26
|
ENG
OPERATION SWITCHES
OPERATION SWITCH FUNCTIONS
The operation switches are located in the control module battery compartment.
NOTE: Some operation switches are not available on all models.
FUNCTION POSITION DEFAULT DESCRIPTION
REVERSIONARY OFF
Disables all non-critical functions, including
Bluetooth audio, AUX audio, and Tap Control.
Only intercom communications and Acoustic
Noise Cancelling are enabled.
In case of emergency hardware or software
failure, set the switch to ON.
For more information, see page 59.
TAP CONTROL OFF
Enables/Disables Tap Control feature
(see page 24).
PRIORITY BT
Establishes priority between two secondary
audio sources connected at the same time.
Select BT to give the Bluetooth (wireless)
connection higher priority.
Select AUX to give the wired connection
higher priority.
For more information, see page 46.
To Next Page
Loading...
