Bose A30 User Manual

38
|
ENG
SECONDARY AUDIO SOURCES
You can connect your headset to a secondary audio source in two ways:
• AUX (wired) connection
• Bluetooth (wireless) connection (applies to Bluetooth models only)
AUX CONNECTIONS
Use the 3.5 mm AUX audio cable to connect a non-wireless device.
1. Make sure the Secondary Audio Mode switch is in the MUTE or MIX position
(see page 45) and the REVERSIONARY operation switch is set to OFF
(see page 28).
NOTE: If the Secondary Audio Mode switch is set to OFF or the REVERSIONARY
operation switch is set to ON, AUX audio functionality is disabled.
2. Connect the cable to the 3.5 mm AUX port on the back of the control module.
3. Connect the other end of the cable to the 3.5 mm port on your audio source.
NOTE: The functions of a connected AUX audio source are not controlled by
the control module.

Bose A30 Specifications

General

Type	Aviation Headset
Connectivity	Wired
Battery Life	Up to 45 hours
Power Source	2 AA batteries or aircraft power
Battery Type	AA batteries
Compatibility	Aircraft audio systems
Noise Cancellation	Active Noise Cancellation (ANC)