Bose A30 User Manual

SECONDARY AUDIO SOURCES
39
|
ENG
BLUETOOTH CONNECTIONS
NOTE: This section applies to Bluetooth models only.
Connect using the Bluetooth menu on your mobile device
1. Make sure the Secondary Audio Mode switch is in the MUTE or MIX position
(see page 45) and the REVERSIONARY operation switch is set to OFF
(see page 28).
NOTE: If the Secondary Audio Mode switch is set to OFF or the REVERSIONARY
operation switch is set to ON, Bluetooth functionality is disabled.
2. Press and hold the Bluetooth/Multi-function button l for 1 second.
The Bluetooth light blinks purple.
3. On your mobile device, enable the Bluetooth feature.
NOTE: The Bluetooth feature is usually found in the Settings menu.
4. Select the headset from the device list.
Bose A30
Once connected, you hear a tone, and the Bluetooth light blinks blue.
NOTES:
• After 5 minutes of inactivity, the headset automatically exits pairing mode, and the
Bluetooth light turns o. To turn the Bluetooth feature back on, press l.
• Each time you turn on the Bluetooth feature, the headset attempts to reconnect
with the two most recently connected Bluetooth devices. If the device(s) are turned
o or out of range, the headset attempts to reconnect to any other devices in the
pairing list, then returns to pairing mode. See “Reconnect a mobile device” on
page 40.

Bose A30 Specifications

General

Type	Aviation Headset
Connectivity	Wired
Battery Life	Up to 45 hours
Power Source	2 AA batteries or aircraft power
Battery Type	AA batteries
Compatibility	Aircraft audio systems
Noise Cancellation	Active Noise Cancellation (ANC)