SECONDARY AUDIO SOURCES
40
|
ENG
Disconnect a mobile device
1. Press and hold the Bluetooth/Multi-function button l for 5 seconds to turn the
Bluetooth feature o.
2. Move the Secondary Audio Mode switch to the OFF position (see page 45).
NOTE: You can also use Bluetooth settings to disconnect your device. Disabling the
Bluetooth feature disconnects all other devices.
Reconnect a mobile device
When powered on, the headset tries to reconnect with the two most
recently-connected devices.
NOTE: The devices must be within range (30 ft or 9 m) and powered on.
Recover a lost connection
When your connected mobile device moves out of range, the connection is lost. The
headset automatically attempts to reconnect for 5 minutes. If the headset is unable
to reconnect, it returns to pairing mode. After 5 minutes of inactivity, the Bluetooth
feature turns o.
1. Move the device back into range.
2. Press l to reconnect.
Connect an additional mobile device
You can store up to eight paired devices in the headset pairing list, and your headset
can be actively connected to two devices at a time.
To connect an additional device, use the Bluetooth menu on your device
(see page 39).
NOTES:
• Only one secondary audio source can be heard at a time.
• Secondary audio will never override the intercom.
To Next Page
Loading...
Need help?
General
