Bose A30 - PRIORITY Operation Switch; Secondary Audio Priority Chart

SECONDARY AUDIO PRIORITY
46
|
ENG
PRIORITY OPERATION SWITCH
Establishes priority between two secondary audio sources connected at the
same time.
1. Locate the PRIORITY operation switch inside the battery compartment.
2. Set the switch to the correct source (BT or AUX). See “Change the operation
switches” on page 28.
• When the switch is in the BT position, the Bluetooth source will override the
AUX source if a signal is detected.
• When the switch is in the AUX position, the AUX source will override the
Bluetooth source if a signal is detected.
NOTE: Incoming and outgoing phone calls will always override any other
secondary source.
SECONDARY AUDIO PRIORITY CHART
Audio sources are heard according to priority:
Active calls will override all
other secondary audio sources
Radio/Intercom
Bluetooth
Phone calls
Streaming
Bluetooth (A2DP)
AUX audio
Priority
Can be changed by setting the
PRIORITY switch
Always overrides all other audio