5
SPECIFICATIONS
502A Array Specifications
Dimensions: 23.5"H x 5.75"W x 6.73"D
(59.7x14.6x17.1 cm)
Weight: 15 lbs. (6.8 kg.)
Transducer Complement: 5 - 4.5 " (11.4 cm) drivers
Enclosure Material: High-impact polystyrene
Nominal Impedance: 8 Ohms, 6.4 Ohms minimum
Sensitivity: 90 dB SPL (1W, 1m, 130 Hz-15 kHz)
Maximum Acoustic Output: 112 dB SPL average, 121 dB SPL peak
Frequency Range: 130 Hz - 15 kHz
Port Tuning Frequency: 135 Hz
Amplifier Power (Recommended): 150 - 600 watts continuous into 8 Ohms
Long-term power handling: 150 watts continuous
Beamwidth: 120° horizontal, 70° vertical
Input Connections: Parallel wired barrier strip (US/Can.)
Parallel wired XLR (Euro/Aus/UK/Japan)
Fusing: 4 ampere AGC (Buss) or 3AG (Littlefuse)
To Next Page
Loading...
Need help?
General
