Boss Modulation MD-200 - Page 13

Overall Settings (Menu)
13
Parameter Explanation
EPF
(EXPRESSION FUNCTION)
Species the function of an expression
pedal connected to the CTL 1, 2/EXP jack.
oFF: No operation.
RAT
(RATE) : The same operation as the
[RATE] knob.
DPT
(DEPTH) : The same operation as the
[DEPTH] knob.
Elv
(E.LEVEL) : The same operation as the
[E.LEVEL] knob.
PR1
(PARAM1) : The same operation as the
[PARAM 1] knob.
PR2
(PARAM2) : The same operation as the
[PARAM 2] knob.
PR3
(PARAM3) : The same operation as the
[PARAM 3] knob.
EPN
(EXPRESSION MIN)
Species the variable range of the
parameter controlled by EXPRESSION
FUNCTION. The variable range diers
depending on the parameter.
EPM
(EXPRESSION MAX)
Parameter Explanation
ILP
(INSERT LOOP POSITION)
Selects the position at which the external
eect unit is connected.
OFF: The insert loop function is not used.
PRE
(PRE) : Connect before the MD-200’s
eect.
Guitar
&
External Eector
&
MD-200
&
AMP
PST (POST) : Connect after the MD-200’s
eect.
Guitar
&
MD-200
&
External Eector
&
AMP
Insert Loop Function
Guitar
AMP
External
Eector
You can connect an external eect unit
between the OUTPUT A/MONO jack and
the INPUT B jack, and use it in conjunction
with the MD-200’s eect.
For some eect types, you can specify
“before or after distortion.”
MEMORYMEMORY
MEMORYMEMORY
MEMORYMEMORY
MEMORYMEMORY