Boss SDE-3 - Connecting an External Pedal; Footswitch Functions (CTL FUNCTION)

Connecting an external pedal
9
Connecting an external pedal
Footswitch functions (CTL FUNCTION)
Ø Footswitch functions (CTL FUNCTION)(P.9)
Expression pedal functions (EXP FUNCTION)
Ø Controlling the knobs using an expression pedal (EXP FUNCTION)(P.10)
Footswitch functions (CTL FUNCTION)
You can connect footswitches (sold separately: FS-5U, FS-6, FS-7) to the CTL 1, 2/EXP jack, and use them to control the following
functions.
Latch-type footswitches (FS-5L) cannot be used.
These functions can’t be changed.
Control
Explanation
CTL1
Sets the tempo using the tap tempo function.
You can easily set the delay time to match the tempo of the song being played by pressing the switch in time with the
song’s tempo (Tap Input).
CTL2
Turns the hold function on/off.
Repeats the delay sound while held down the switch (hold mode).