• • •
88
d) Put the acceleration lever to Min.
e) Main shift lever / range shift lever into “NEUTRAL”
position.
f) After the thermostat lamp has turned off, depress the
clutch pedal fully and turn the MAIN KEY SWITCH to
START
g) Once the engine has started, take your hand off the
MAIN KEY SWITCH.
h) Increase the engine to about 1,500rpm and warm it
up for about ve minutes without a load.
OPERATIONS & WORK
20R OPERATORS MANUAL (030712).indd 88 3/8/2012 4:04:14 PM
To Next Page
Loading...
Need help?
General
