• • •
89
2. TO STOP THE ENGINE
a) Put the acceleration lever on LOW, and turn the main
switch to “OFF”.
b) Put shuttle lever, main gearshift lever and PTO shift
lever to “N”. Put PTO clutch switch in to the “OFF” posi-
tion and front wheel lever to the “OFF”.
c) Put the position control lever on “DOWN”.
• When stopping the engine, never stop
it with the reducer lever.
• After stopping the engine, make sure
to apply the parking brake.
WARNING
(Note) for warming-up operation, strongly step on the
brake pedal and pull your parking brake.
When leaving the tractor, park the tractor in
a at and safe place, put the shuttle lever
and the main shift lever to “N”, and block
the tires.
WARNING
OPERATIONS & WORK
[Otherwise]
The tractor may move and cause an acci-
dent. ALWAYS SET THE PARKING BRAKE
20R OPERATORS MANUAL (030712).indd 89 3/8/2012 4:04:14 PM
To Next Page
Loading...
Need help?
General
