Branson F42r - Gear Case; Frame and Oil Suction Pipe; Oil Pan; Oil Seal Housing

2
-
89
42hW-201601
CHAPTER 2 ENGINE3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
2
6.4.12 OIL PAN
Apply the liquid packing on the oil pan. (Use
Loctite 5060 or similar product.)
Assemble the oil pan.
Tighten the bolts to hold oil pan. (Tightening
torque: 2.7 kg•m)
1.
2.
3.
K25W268A
6.4.11 FRAME AND OIL SUCTION PIPE
Assemble the oil suction pipe with packing.
Tighten the bolts to hold oil suction pipe. (Tightening
torque: 2.7 kg•m)
Apply the liquid packing on the frame. (Use Loctite
5060 or similar product.)
Assemble the frame.
Assemble the bolts to hold frame. (Tightening
torque: 2.7 kg•m)
1.
2.
3.
4.
5.
K25W269A
6.4.13 OIL SEAL HOUSING
Apply the liquid packing on the oil seal housing.
(Use Loctite 5060 or similar product.)
Assemble the oil seal housing.
Tighten the bolts to oil seal housing. (Tightening
torque: 2.7 kg•m)
1.
2.
3.
K25W274A
6.4.10 GEAR CASE
Apply the liquid packing on the gear case. (Use
Loctite 5060 or similar product.).
Assemble the bolts to hold the gear case.
(Tightening torque : 2.7 kg•m).
1.
2.
K25W276A