Branson F42r - Changing Engine Oil

42hW-201601
1
-
29
CHAPTER 1 GENERAL INFORMATION3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
1
4. Wait for 15 minutes and check the oil level. The
oil level should be up to the upper limit on the
dipstick (2).
F42W119A
8.2.8 CHANGING ENGINE OIL
Remove the drain plug (1) to drain engine oil.
Fit the drain plug and tighten it to 50 N.m (37
lb.ft).
Add clean oil with pro per visc osit y to t he
crankcase.
1.
2.
3.
F42W118A
CAUTION

-


      

F42W120A
5. Runtheengineforawhileandchecktheoilller
hole (3) and drain plug for oil leakage.
SPECIFIED
AMOUNT OF
ENGINE OIL
4.3ℓ(1.14u.s.gal.)
LUBRICANTS
3015R/3515R/4015R (Final Tier4):
SAE 15W-40 Grade CJ or higher
F36R/F42R (Stage
Ⅲ
A):
SAE 15W-40 Grade CG or higher