Branson F42r - Fuel

2
-
11
42hW-201601
CHAPTER 2 ENGINE3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
2


K25W230A
(1) Lubricating oil (2) Dip stick
Lubricating oil and element replace which at 1st
time is after 50hrs operated engine. And then 2nd
time and thereafter is every 250 hr.
•
2.2.3 FUEL
The characteristics of diesel engine fuel (Cetane,
specific gravity, viscosity, etc) has a effect on
engine start, power out, fuel consumption, the
functionality of a chain of fuel, knock, emission,
etc. Use the fuel that has Cetane value 40-48
and use a lower viscosity at low temperature.
•
K25W231A
After purchasing fuel:
$
OORZGUXPWRVWDQG
aGD\V
After 3~4 days:
3XWDVXFWLRQSLSH
KDOIZD\LQWRWKHGUXP
>:DWHUDQGGXVW
DFFXPXODWHLQWKHORZHU
SRUWLRQRIWKHGUXP@
K25W232A
The contaminated fuel can be a cause of starting
failure and the engine will emit bluish white exhaust.
The fuel that contains water and dust can cause
a serious failure, so always use clean fuel.
1) The case which store the fuel in the house,
stand the drum for several days to precipitate
the water and dust to the bottom and then use
the fuel at the top.
2) Before operating the engine, open the drain
cock at the bottom of the fuel tank and remove
the sediments.
•
•