Branson F42r - Adjusting Brake Pedal; Adjusting Fan Belt Tension

42hW-201601
1
-
33
CHAPTER 1 GENERAL INFORMATION3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
1
)UHHSOD\
1
F42W129A
8.2.14 ADJUSTING BRAKE PEDAL
Release the parking brake. 1.
BRAKE PEDAL

5 - 10 mm (0.19 - 0.39 in)
2. Depress the brake pedal (1) slightly and then
release it.
3. Check the free play of the pedal when releasing it.
4. Unscrew the lock nut (2) of the brake rod under the
oorandturntheturnbuckle(3)toadjustthefreeplay.
5. Adjust both pedals to the same amount of free play.
6. Tighten the lock nut.
F42W130A
8.2.15 ADJUSTING FAN BELT TENSION
Stop the engine, remove the ignition key and
apply the parking brake.
Check the tension of the fan belt (1).
Loosenthetensionadjustingbolt(2).
Place a stick or pipe between the alternator (3)
and cylinder block.
Push the alternator outwards to adjust the fan
belt tension.
Tighten the adjusting bolt.
1.
2.
3.
4.
5.
6.
CAUTION

 


 -
-

F42W131A
BELT DEFLECTION
[

10-15 mm (0.39-0.59 in)
TORQUE
VALUE
Mounting bolt 26 Nm(19 lb.ft)
Adjusting bolt 52 Nm(38 lb.ft)
A42W105B
HST MODEL
MEC. MODEL