Branson F42r - Injection Valve (Injector); Water Pump; Intake Manifold; Fuel Drain Pipe

2
-
94
42hW-201601
CHAPTER 2 ENGINE 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
6.4.22 INJECTION VALVE (INJECTOR)
Assemble the new nozzle space cup and sealing
washer.
Assemble and use the flat plate of injector.
(Tightening torque : 7.5 kg-m)
1.
2.
6.4.23 WATER PUMP
Assemble the water pump with new packing.
Tighten the bolts to water pump. (Tightening
torque: 2.7 kg•m)
Assemble the V-pulley.
Tighten the bolts to V-pulley. (Tightening torque: 2.7
kg•m)
1.
2.
3.
4.
K25W284A
K25W258A
6.4.24 INTAKE MANIFOLD
Assemble the intake manifold with new packing.
Tighten the bolts and nuts to hold the intake
manifold. (Tightening torque: 2.7 kg•m)
1.
2.
6.4.25 FUEL DRAIN PIPE
Assemble the new packing.
Tighten the nuts after install the drain pipe.
(Tightening torque : 2.3 kg-m)
Assemble the drain hose. (Drain pipe ~ injection
pump.)
1.
2.
3.
K25W257A
K25W255A