A42W603B
(1) PST cylinder
(2) Hydraulic pump (7cc)
(3) Hydraulic pump (13cc)
(4) PST valve
(5) Front outlet valve
(6)Hydrauliclter
(7) PTO valve
(8) Rear relief valve
(9) Hydraulic cylinder case
(10) Control valve
(11)HSTlter
(12) Oil cooler
(13) HST
For the HST model, the hydraulic circulation circuit of the primary gear pump (13 cc/rev.) is the same to the
one for the mechanical model. However, these two models have different methods for hydraulic pressure
delivery of the secondary gear pump (7.0 cc/rev.).
Hydraulic oil supplied from the secondary gear pump is used to operate the PST valve and PTO valve. Then,
itiscarriedfromthePTOvalveintotheHSTltertobeltered.Afterltered,itisledintotheoilcoolertobe
cooleddowntoasufcientlevelbeforeitisdeliveredtotheHSTforHSToperation.