6
-
88
42hW-201601
CHAPTER 6 HYDRAULIC SYSTEM 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
K20W6A19A
4. Unscrew the end cap mounting bolts (1) from the
steering valve assembly to remove the end cap (2).
The bolt A among the end cap mounting bolts
is longer than the other ones. Make sure to in-
stall it correctly.
IMPORTANT
K20W6A20A
5. Remove the spacer (1) and gerotor set (2) in
order.
K20W6A21A
6. Pull out the drive (3) and remove the plate (4), spool and sleeve assembly (5), thrust bearing (6), O-ring (7),
grand bushing (8) and retaining ring (9) in order.
To Next Page
Loading...
