6
-
92
42hW-201601
CHAPTER 6 HYDRAULIC SYSTEM 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
K25W671A
C865W767A
M6 BOLT 5 EA
5-mm L-shape wrench
4. Unscrew the spring holder (1) from the inner upper Unscrew the spring holder (1) from the inner upperUnscrew the spring holder (1) from the inner upper
section of the front cover. Then, remove the spring
(2) and check valve (3).
C865W769A
5. Remove the valve plate (1) on the motor side. Remove the valve plate (1) on the motor side.Remove the valve plate (1) on the motor side.
Then, separate the cylinder block (2) and piston
assembly (3).
Set the valve plate grooves (A) on the motor
side toward the cylinder block during assem-
bly (groove in section A: two (both directions)
•
Notes
C865W770A
A42W635A
To Next Page
Loading...
