6
-
94
42hW-201601
CHAPTER 6 HYDRAULIC SYSTEM 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
6. Pull out the snap ring (2) from rear of motor shaft
and remove the cover (3) and motor shaft(1) by
tapping snap ring direction.
A42W646A
A42W636A
C865W776A
K25W673A
K25W677A
7. Remove the valve plate (1) on the pump side. Remove the valve plate (1) on the pump side.Remove the valve plate (1) on the pump side.
Then, remove the cylinder block (2), piston (3),
set plate (4) and shoe plate (5) after separate the
cylinder block and piston assembly.
Set the valve plate grooves (A) on the pump
side toward the cylinder block during assembly
(groove in section A: one (rotating direction))
•
Notes
C865W779A
K25W676A
To Next Page
Loading...
