9
English
7. Warnings and precautions
This thermometer is for professional use only.
This thermometer must only be used with genuine Braun ThermoScan probe covers.
Do not use any cleaning agent other than isopropyl or ethyl alcohol for cleaning the probe
lens window and probe as specified in the cleaning section of this manual.
Do not use any cleaning agent other than the approved list of cleaners for cleaning the
body of the thermometer.
To avoid inaccurate measurements, always attach a new, clean probe cover for each
temperature measurement.
The probe lens window must be kept clean, dry and undamaged at all times to ensure
accurate measurements. To protect the probe lens window, always keep the thermometer
in the storage cradle while transporting or when not in use.
This thermometer is not intended for pre-term babies or small-for-gestational age babies.
Do not modify this equipment without authorization of manufacturer.
Never use the thermometer for purposes other than those it has been intended for. Please
follow the general safety precautions.
Do not expose the thermometer to temperature extremes (below –4ºF / – 25ºC or over
122ºF / 55ºC) nor excessive humidity (> 95 % RH).
This thermometer complies with current required standards for electromagnetic
interference and should not present a problem to other equipment nor is it effected
by other devices. As a precaution, avoid using this device in close proximity to
other equipment.
8. Setup
8.1 Battery installation
Your Braun PRO 6000 thermometer ships with two (AA) alkaline batteries.
See 14.7 Maintenance and service, Replacing the batteries.
The Braun PRO 6000 Charging station (sold separately) ships with one rechargeable
battery pack.
To Next Page
Loading...
