25
English
14.5 Removing and installing probe cover box carrier
1
Remove thermometer from cradle by gripping thermometer at
base and pivoting up.
2
Remove probe cover box carrier from the cradle by rotating the
probe cover box carrier forward.
3
Place probe cover box carrier back in cradle by lining up the
brackets and pushing down.
14.6 Storage instructions
Store thermometer and probe covers in a dry location (the thermometer is not protected against
ingress of water), free from dust and contamination and away from direct sunlight. The ambient
temperature at the storage location should remain fairly constant and within the range of 50°F to
104°F (10°C to 40°C) to allow for immediate use.
To Next Page
Loading...
