24
English
14.3 Cleaning and disinfecting tether (sold separately)
1
To clean the tether, ensure that the wipe is moist, not saturated.
Wipe the tether with a damp cloth or cleaning wipe with
cleaning solution from the Approved Cleaning Solutions Table.
14.4 Installing new probe cover box
Keep out of reach of children.
1
Remove empty probe cover box from probe cover box carrier
by pulling up.
2
Open the new probe cover box. Pull down on the perforated
strip. Discard perforated strips.
3
Insert new probe cover box into probe cover carrier by placing
inside brackets and pushing down
To Next Page
Loading...
