16
English
1
Dock the Braun PRO 6000 thermometer in the Charging Station
2
The recommended action is to use the USB cable that connects
to the wall adapter - unplug it from the wall adapter and plug it
into your computer.
3
Launch the Service Tool. If the log on prompt appears
enter the User ID “ADMIN” (all caps) with no password
and click the log on button.
4
Click the Braun Thermometer
from the device list to highlight,
then click the select button.
11.3 Advanced function settings
The charging station or compatible Welch Allyn Vital Signs device can be used with the Welch Allyn
Service Tool to modify settings on the thermometer.
Follow the instructions to access Braun Pro 6000 advanced settings using the Welch Allyn Service Tool.
To Next Page
Loading...
