11
English
9. Using the Braun PRO 6000
Temperature measurement
1
Remove thermometer from cradle by gripping
thermometer at base and pivoting up.
Thermometer will turn on automatically. Probe cover icon
will flash on display indicating a new probe cover is needed.
2
Attach new probe cover by
pushing probe tip straight into box,
then pulling thermometer out.
3
Wait for the ready indication. Ring around
MEASURE button turns green, thermometer will beep once
and three lines on display indicate thermometer is ready.
4
Place probe snugly
in ear canal and direct
toward opposite temple.
Keep thermometer probe steady
in the ear canal. Correct probe
placement is essential for accurate
measurements.
To Next Page
Loading...
