27
English
Long term storage ranges
Storage temperature: -13–131°F (-25–55°C)
Storage humidity: 15%–95% non condensing
Shock: Withstands drop of 3 feet (91.44 cm)
Warm up time: Initial start-up time: 3–4 seconds
Measurement time: 2–3 seconds
Automatic power down: 10 seconds
Battery life: 6 months/1000 measurements
Battery type: 2 x MN 1500 or 1.5 V AA (LR6)
Thermometer dimension: 6˝ x 1.7˝ x 1.3˝ (152 mm x 44 mm x 33 mm)
Thermometer weight: 3.6 oz (100 g) without batteries
Pressure: 700-1060hPA (0.7-1.06 atm)
The thermometer is specified to operate at 0.7-1.06
Atmospheric Pressure.
CAUTION: Do not use this device in the presence of electromagnetic or other interference
outside the normal range specified in IEC 60601-1-2.
WELC H ALLYN A USTRALIA PTY LT D
UNIT 5 3 8 SOU TH S TREET
R YDAL MERE, N S W 2116
A U S TRA LIA
Standards and compliance
This device conforms to the following Safety and Performance standards:
This infrared thermometer meets requirements established in ASTM Standard E 1965-98
(for the thermometer system [thermometer with probe cover]). Full responsibility for the
conformance of the product to the standard is assumed by Kaz USA, Inc.,
250 Turnpike Road, Southborough, MA 01772, USA.
This product conforms to the provisions of the EC directive 93/42/EEC (Medical Device Directive).
A clinical summary is available upon request.
EN 60601-1:2006 Medical electrical equipment –
Part 1: General requirements for basic safety and essential performance
15. Specifications
Displayed temperature range: 68–108°F (20–42.2°C)
Operating ambient temperature range: 50–104°F (10–40°C)
Display resolution 0.1°F or °C
Accuracy for displayed temperature range: ±0.4°F ( (±0.2°C) (35.0°C-42°C) (95°F - 107.6°F)
±0.5°F (±0.3°C) (outside this temperature range)
Clinical repeatability: <0.57°F (0.3°C)
To Next Page
Loading...
