31
English
Guidance and manufacturer’s declaration – electromagnetic emissions
The PRO 6000 is intended for use in the electromagnetic environment
specified below. The customer or the user of the PRO 6000 should ensure that
it is used in such an environment.
Emissions test Compliance Electromagnetic environment - Guidance
RF emissions CISPR 11 Group 1
The PRO 6000 uses RF energy only for it’s
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment
RF emissions CISPR 11 Class BF Complies
Harmonic emissions IEC
61000-3-2
N/A
The PRO 6000 is solely battery powered.
Voltage fluctuations /
flicker emissions
N/A
Non-life support equipment separation distance calculation
(3Vrms / 3V/m compliance)
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz in
ISM bands
d=[3.5/V
1
]
80 MHz to 800 MHz
d=[3.5/E
1
]
800 MHz to 2.5 GHz
=[7/E
1
]
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.74
1 1.17 1.17 2.33
10 3.69 3.69 7.38
100 11.67 11.67 23.33
To Previous Page
Loading...
