High-temperature Burn
Pay attention to your safety during maintenance. Carefully, do not be burnt by the ghi-temperature
engine, exhaust pipe, muffler and other hot parts. You should take care of each other in case of
cooperation with others.
Maintenance Regulations
While repairing and servicing, try to use tools of metric system as possible as you can. Incorrect
tools may damage the motorcycle.
Before take down or open protecting plate for maintenance work, please clean the dirt on external
surface of the component or the assembly to prevent the dirt from falling into the engine, chassis
or braking system.
After disassembly and before measuring friction, please clean
the components and purge with air compressor.
Do not bend or distort during operation to avoid difficult
operation or earlier damage.
Plastic parts may deteriorate due to aging, which are apt to be damaged by solvent or oil. Check
before re-installation and replace if necessary.
KS MOTORCYCLES - http://ksmotorcycles.com
To Next Page
Loading...
