Need help?Do you have a question about the Broadcom Brocade X7-4 Director and is the answer not in the manual?
General| Product Type | Director Switch |
|---|---|
| Fibre Channel Speed | 32 Gbps |
| Width | 17.3 in |
| Weight | 250 lbs |
| Power Supply | Hot-swappable |
| Cooling | Redundant, Hot-swappable fans |
| Ports | Up to 384 ports (depending on configuration) |
| Management | Brocade Network Advisor |
Details general, ESD, and power precautions for safe installation.
Outlines the necessary electrical, thermal, and rack requirements before installation.
Describes various locations and rack mount kits for mounting the device.
Lists specific precautions to follow when mounting the device.
Instructions for installing airflow diversion kits for four-post racks.
Details mounting the device into the rack.
Outlines tasks for initial configuration, setup, verification, and backup.
Explains how to provide power to the device and related precautions.
Provides steps for connecting AC power cords to the device's power supplies.
Lists precautions for chassis replacement, including ESD and lifting.
Instructs on running commands and saving output for critical information.
Restores the original configuration using the configDownload command.
Details reconnecting the device to the network and fabric after replacement.
Steps to verify the system's correct operation after reconnection.
Electrical safety precautions related to power cords and grounding.
Alerts to potentially lethal or extremely hazardous conditions.
Hazards associated with laser radiation from fiber optic interfaces.
To Next Page