1-11
Rated Capacity Limiter:
Operator's aid that warns operator of impending overload with audible and
visual signals. Has read-outs for load, boom angle, boom length and load
radius. In the event of an overload, dumps the following boom functions:
HOIST RAISE, TELESCOPE EXTEND, BOOM LOWER, SWING LEFT, and
SWING RIGHT. These circuits are returned to normal by lowering load to a
safe resting place with hoist or by retracting or raising boom to a shorter load
radius. Key-operated, momentary override switch located under dashboard.
Optional Boom Attachments:
Boom Extension - 8 Foot (2.4 m):
Provides 8 feet (2.4 m) of additional length for lifting loads with load line.
Boom extension may be stowed along side base boom section when not in
use. Tip sheave, attaching brackets, and pins included. Deduct 100
pounds (45 kg) from Capacity Chart when boom extension is in stowed
position. Includes switch and trip arm for Anti-Two-Block system.
Net Weight: 130 pounds (59 kg)
Boom Extension - 8 Foot (2.4 m) Offset:
Same as standard boom extension except has three settings: 0 degrees (in-
line), 15 degrees offset and 30 degrees offset.
Net Weight: 150 pounds (68 kg)
Searcher Hook:
2000 pounds (907 kg) capacity. Swivel hook with spring latch hangs from
support structure projecting outward from boom tip. Net Weight: 30 pounds
(14 kg)
Specifications subject to change without notice.
Courtesy of Crane.Market
To Next Page
Loading...
