Broderson IC-35-2F - Introduction

1-1
BRODERSON MANUFACTURING CORP.
IC-35 INDUSTRIAL CRANE
INTRODUCTION
The Broderson IC-35 was designed and built to provide safe, dependable and efficient
crane service. This we assure by our testing and quality control procedures. To
properly utilize the full potential of the equipment, the following customer controlled
conditions must exist:
1. The operator must understand the equipment.
2. The operator must know the operating characteristics.
3. The operator must observe the safety rules.
4. The equipment must be given proper maintenance.
This manual was written to provide information required for these conditions. The
recommendations for periodic inspection, test and maintenance are minimum standards
for safe and economical performance.
When ordering parts, the unit serial number, unit model number, part number, part
description and quantity must be provided.
This unit must not be altered or modified without written factory approval.
To reorder this manual, ask for IC-35-2F Operation and Maintenance Manual Part
Number 0-990-30168. Contact your Broderson service representative at:
Broderson Manufacturing Corp.
P.O. Box 14770
Lenexa, Kansas 66285 USA
913-888-0606
NOTICE
If this crane becomes involved in an accident, please call Broderson Manufacturing Corp.
at 913-888-0606, and ask for the Legal Department or the Service Manager. Also,
please notify your Broderson dealer.
Courtesy of Crane.Market