1-4
SECTION 1
DESCRIPTION AND SPECIFICATIONS
BMC’s IC-35-2F is a self-propelled industrial crane designed for in-plant lifting and
material handling applications. It has the special features of low height, narrow width,
short length, cargo deck, rear wheel steer, and front wheel drive. The basic unit consists
of a chassis and hydraulic boom assembly. The chassis includes a frame, four hydraulic
outriggers, engine, variable speed hydrostatic transmission, front driving and rear power
steering axles. The boom assembly includes a hydraulic powered continuous rotation
turret, 3-section telescopic boom, hydraulic boom elevating cylinder, hydraulic boom
extension cylinders and hydraulic powered hoist. A Rated Capacity Limiter is also
standard.
IC-35-2F:
3-section hydraulically extended boom with capacity of 8,000 pounds (3629 kg) at
a 4-foot (1.2 m) load radius. Horizontal reach of 19 feet 2 inches (5.84 m) and
vertical reach of 26 feet (7.92 m). Hoist is located on back of turret.
GENERAL:
Length:
Chassis 9 feet 11 inches (3.02 m)
Overall 11 feet 11 inches (3.63 m)
Width: 5 feet 0 inches (1.52 m)
Height:
Deck 28 inches (71.12 cm)
Overall 6 feet 6 inches (1.98 m)
Wheelbase: 6 feet 0 inches (1.83 m)
Ground Clearance:
Chassis 7 inches (17.78 cm)
Minimum (Rear Axle) 5 inches (12.7 cm)
Angle of Approach: 26 degrees
Angle of Departure: 21 degrees
Turning Radius: (Min.) 11 feet 2 inches (3.40 m)
Aisle Width: 90 degree Turn (Min.) 8 feet 3 inches (2.52 m)
Travel Speed: (Max.) 10 mph (16 km/h)
Courtesy of Crane.Market
To Next Page
Loading...
