Broderson IC-35-2F - Maintenance Intervals (500, 1000 Hrs, Annual)

To Next Page

To Previous Page

3-6

1000 HOUR INTERVAL:

1. 50, 250 and 500 hour maintenance.

2. 50, 250, 500 and 1000 hour lubrication.

3. Adjust engine valve clearance per engine manual.

4. Check and adjust engine speed.

5. Perform engine maintenance specified in engine manual.

6. Change hydraulic fluid and filters and clean breather and reservoir.

6 MONTH INTERVAL: (For usage less than 250 hours in 6 months)

1. Perform 250 hour maintenance and lubrication.

2. Change hydraulic filter elements and inspect oil.

12 MONTH INTERVAL: (For usage less than 500 hours per year)

1. Perform 6 month maintenance.

2. Perform 500 hour maintenance.

3. Change hydraulic fluid and filters and clean breather and reservoir.

24 MONTH INTERVAL:

1. 12 month maintenance.

2. Pressure test engine cooling system.

3. Flush cooling system.

4. Change engine thermostat.

5. Fill with new coolant and distilled water.

6. Perform engine maintenance specified in engine manual for 24 month interval.

S/N:_______________HOURS:________DATE:________BY:___________________

COMMENTS & PARTS REQUIRED:________________________________________

_____________________________________________________________________

Courtesy of Crane.Market

Related product manuals