86
BAS-311E.311EL.326E.326EL
Chapter 6 Power supply and electrical parts adjustment
6. Changing special functions using the memory switches
The functions of the switches on the operation panel can be changed to carry out special functions.
Note:The following are special uses. All the memory switches are set to OFF before shipment from the factory.
1. Turn on the power switch.
2. While pressing the TEST switch q, press the STEP BACK switch w to switch to setting mode.
3. Press the program select switch r so that the number displayed on the display screen e matches the switch number
(00 - 3F) for the function that you would like to select from the table.
4. Press the STEP BACK switch w to switch the setting appearing in the display screen t from OFF to ON.
If pressed once more:
■ If the B.T. CHANGE switch y is pressed at this time, all memory switch settings will be changed to OFF.
5. Press the TEST switch q. The display will return to normal.
プログラプログラムNO.NO.
PROGRAM NO.PROGRAM NO.
メニューメニュー
MENUMENU
下糸カウンタ
ー
B.T. COUNTER
スプリットNＯ.
SPLIT NＯ.
横倍率
X
-
SCALE
縦倍率
Y
-
SCALE
スピ
ー
ド
SPEED
読/書
R / W
BAS-300E series
電源
POWER
テストテスト
TESTTEST
ステッテップバック
STEP BACKSTEP BACK
下糸設定下糸設定
B
.
T. SET. SET
下糸交換下糸交換
B.B.T. CHANGE. CHANGE
r
e
t
q
y
w
To Next Page
Loading...
Need help?
General
