Brother BAS-415 - Page 68

( BAS-415 )
1. Dip switch functions on main printed circuit board
~
WJD
1
~
2
~
3
.,.ON
l?%LJ
4
I
-
~
5
~ 6
sw
~
7
I?ZL)
8
All dip switches are set to OFF before shipping.
switch number
state
function
SW1
OFF To set paper tape reading speed to 9600 baud
ON To set paper tape reading speed to 4800 baud
OFF
To store data of floppy disk in the memory
SW2
ON
To read and sew data of floppy disk
(Data cannot be stored
in the memory.)
OFF
If another floppy disk is inserted during data reading or sewing of a
pattern (character), machine will stop operation at that point.
SW3
Even if another floppy disk is inserted during data reading or sewing
ON
of a character (pattern), machine will continue reading or sewing
until it is done.
SW4
OFF
To displav pattern name of sewing data during sewing
ON
To display sewing speed (rpm.) durina sewina
sws
OFF
Spare (Use with OFF.)
ON
SW6
OFF
Spare (Use with OFF.)
ON
SW7
OFF
Spare (Use with OFF.)
ON
SW8
OFF
To display Japanese
ON To display English
NOTE: The power of the machine should be turned off before changing switch.
If the power is not turned off, functions do not change;
-65-
From the library of: Superior Sewing Machine & Supply LLC