69
8
8
Voice operations
(MFC-1905 only)
8
Voice calls can be made with the handset by
using the dial pad or by pressing (Address
Book) twice and entering a two digit Speed
Dial number.
Making a telephone call 8
a Pick up the handset.
b When you hear the dial tone, enter a
number using the dial pad or press
(Address Book) twice and enter a two
digit Speed Dial number.
c Replace the handset to hang up.
Telephone line
services 8
Setting the telephone line
type 8
If you are connecting the machine to a line
that features a PBX or ISDN to send and
receive faxes, it is necessary to change the
Telephone Line Type accordingly by
completing the following steps. If you are
using a line that features a PBX, you can set
your machine so that it always accesses the
outside line (using the prefix you entered), or
accesses the outside line when Tel/R is
pressed.
a (For MFC-1900(E) and MFC-1905)
Press Menu, 0, 6.
(For MFC-1910W(E))
Press Menu, 0, 5.
b Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
c Do one of the following:
If you chose ISDN or Normal, go to
step g.
If you chose PBX, go to step d.
d Do one of the following:
If you want to change the current
prefix number, press 1 and go to
step e.
If you do not want to change the
current prefix number, press 1 and
then OK. Go to step f.
e Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
• You can use the numbers 0 to 9, #, l
and !.
(Press Tel/R to display “!”.)
• You cannot use ! with any other
numbers or characters.
• If you choose On, pressing Tel/R (the
screen displays “!”.) will let you access
an outside line.
• If you choose Always, you can access
an outside line without pressing Tel/R.
f Press a or b to choose On or Always.
Press OK.
g Press Stop/Exit.
Telephone and external devices
(MFC models)
8
To Next Page
Loading...
