Chapter 4
30
Switching Users 4
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to the restricted user Mode
a Hold down d as you press
Secure/Direct.
Function Lock
Change ID
a XXX
b XXX
Select ab or OK
b Press a or b to choose your name.
Press OK.
c Enter your four-digit password.
Press OK.
Note
• If you press the Scan mode key when it is
restricted, Access Denied will appear
on the LCD and then the machine will ask
your name. If you are a restricted user with
access to Scan mode, press a or b to
choose your name and enter your
four-digit password.
• After a restricted user has finished using
the machine, it will return to the Public
mode within one minute.
To Next Page
Loading...
