Brother DCP-8110DN - Sending a Scanned Image; Viewing and Printing Received PC-FAX Data

ControlCenter4
94
4
Sending a scanned image 4
The (Send Scanned Image) button lets you scan a page or document and automatically send the image
as a fax from your computer using the Brother PC-FAX software.
a Select the PC-FAX tab.
b If you want to change the scan settings, right-click (Send Scanned Image) and then change your
settings. If you want to preview and configure the scanned image, check PreScan. Click OK.
c Click (Send Scanned Image).
d The PC-FAX sending dialog will appear. Enter a fax number and then click Start.
Viewing and printing received PC-FAX data 4
The (View Received PC-FAX) button lets you view and print received fax data using the Brother
PC-FAX software. Before you use the PC-FAX Receive function, you must select the PC-FAX Receive
option from the control panel menu of your Brother machine. (See Enabling PC-FAX Receiving software
on your machine uu page 120.)
a Select the PC-FAX tab.
b Click (View Received PC-FAX).
c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received
data will appear. To view the data, click (View).
d If you want to print the received data, select the data and then click (Print).
e Configure the print settings and then click (Start Printing).