Brother DCP-8110DN

ControlCenter4
102
4
e Set the file type for saving to a folder. Click Configuration, and then select Button settings, Scan and
File.
The configuration dialog box appears. You can change the default settings.
1 Choose PDF (*.pdf) from the File Type pull-down list.
2 You can enter the file name you want to use for the document.
3 You can save the file to the default folder, or choose your preferred folder by clicking the (Browse)
button.
4 You can choose a scanning resolution from the Resolution pull-down list.
5 You can choose the document size from the Document Size pull-down list.
1
2
4
5
3