Brother DCP-8110DN

Scanning
49
3
d Click Select.
e Choose TWAIN: TW-Brother MFC-XXXX or TWAIN: TW-Brother MFC-XXXX LAN from the
Available Scanners list. (Where XXXX is your model name.)
f Check the Display scanner dialog box on the Scan or Get Photo panel.
g Click Scan.
The Scanner Setup dialog box appears.
h Adjust the following settings, if needed, in the Scanner Setup dialog box:
 Scan (Image Type) (1)
 Resolution (2)
 Scan Type (3)
 Reduce Noise (4)
 Brightness (5)
 Contrast (6)
 Document Size (7)
 Duplex (two-sided) Scanning (8)
(For DCP-8155DN, MFC-8910DW and MFC-8950DW(T))
i Click Start.
When scanning is finished, click Cancel to return to the PaperPort™ 12SE window.