Brother DCP-J752DW

Chapter 7
44
Ink Save Mode (MFC-J870DW)7
Ink Save Mode can help you save ink. The
machine prints the colours lighter and
emphasises the outlines of the images as
shown below:
The amount of ink saved will vary depending
on the document.
Ink Save Mode: Off
7
Ink Save Mode: On 7
(The above screens are used in ISO/IEC
24712.)
a Load your document.
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Press a or b to display
Advanced Settings.
f Press Advanced Settings.
g Press a or b to display
Ink Save Mode.
h Press Ink Save Mode.
i Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j If you do not want to change any
additional settings, press Mono Start
or Colour Start.
NOTE
• Book Copy, Thin Paper Copy,
Page Layout, Watermark Copy and
Remove Background Colour are not
available with Ink Save Mode.
• Ink Save Mode may make your
printouts look different from your original
document.